maandag 5 december 2011

12 tags of Christmas - tag 5


Hallo allemaal,

Voelen jullie ook elke dag de spanning wat Tim nu weer gemaakt zou hebben. Nu ik wel hoor. Gauw even s'morgens kijken wat het vandaag geworden is en gedurende de dag alvast bedenken wat ik daar mee zou kunnen doen.
Helaas heb ik nog niet zoveel tijd gehad om zelf al veel tags te maken. Alleen tag 1 is echt af, maar ik heb nog tot eind december om ze alle 12 te maken, dus dat gaat vast goed komen.

Alle producten die voorradig zijn vindt je in deze map: 12 tags of Christmas - TAG 5

Hier is de ingredientenlijst van Tim:
supplies: craft sheet, alcohol inks/cranberry/red pepper/watermelon, ink applicator tool, archival ink/jet black, paint dabber/lettuce, distress ink/pumice stone, ink blending tool, glossy accents, glossy cardstock; grungepaper, tiny attacher, sanding grip; dies/regal crest/tag & bookplate; cms112 seasonal reflections, grid-blocks; clearly heavy transparency; pearls

Voordat we van start gaan, kijk even op Tim zijn blog naar het filmpje of reflection stempelen.

step 1: die cut a #8 tag from white glossy cardstock and a piece of clearly heavy transparency (from hambly studios). *note: you can use clear packaging for this step too, but i like the thickness of the clearly heavy from hambly - great for books too.
Stap 1 Stans een tag uit witte glossy cardstock en uit een stuk zwaar transparantie. (note: je kan ook uit verpakkingsmateriaal stanzen)

step 2: remove the clear protective film from both sides of the transparency.
Stap 2: verwijder de beschermingslaag aan beide zijde van het transparantie.

step 3: apply a piece of felt to the ink applicator too.
Stap 3 plaats een stukje vilt op de applicator

step 4: apply several colors of adirondack alcohol ink (red pepper, watermelon, cranberry).
stap 4 breng verschillende kleuren alcohol inkt aan (red pepper, watermelon, cranberry)

step 5: begin tapping the inked tool on to one side only of the clear tag.
stap 5 begin de inkt op het een zijde van de clear tag te deppen.

step 6: continue inking until the tag is completely covered and allow the tag to dry for 10 seconds before adding more ink. note: to build the intensity of the color, reapply as many layers of ink as you wish. as long as the first layer is allowed to dry, additional layers will create intensity. allow the tag to dry completely - do not heat.
stap 6 ga door met inkten tot dat de tag volledig bedekt is. Laat het tussen door 10 seconden drogen. Hoe meer lagen des te intenser de kleuren worden. Gebruik GEEN heat tool.

step 7: mount seasonal reflections stamp on to grid-block and ink with jet black archival ink. stamp image on to the inked side of the tag.
stap 7 plak de Seasonal reflection stempel op een grid blok en bedek met Archival inkt. Stempel op de beinkte zijde van de tag.

step 8: immediately blot the wet stamped ink with a soft cloth - DO NOT wipe, just blot.
stap 8 dep onmiddelijk, met een zachte doek de natte inkt, NIET vegen.

step 9: once you've blotted most of the ink, begin lightly wiping the remainder of the ink away always working on a clean area of the cloth - this removes the stamped image and lcohol ink like magic!
stap 9 wanneer je de meeste inkt heb weg gedept, begin zachtjes het restant van de inkt te verwijderen. Werk altijd met een schoon stukje van de doek. Dit verwijderd de gestempelde afdruk en de alcohol inkt. het is net magie!

step 10: repeat for the next stamping directly below the first one, and follow previous instructions to remove image.
Stap10 Herhaal het stempelen en bovenstaande instructies,

step 11: stamp a third time and repeat previous instructions to remove image. *note: if things do go right, simply all of the ink off the tag using blending solution...no worries.s
Stap 11 stempel voor een derde keer en herhaal bovenstaande instructies om de afdruk te verwijderen.(note, als iets niet goed gaat kan je alles van je tag afhalen met blending solution.

step 12: place your tag over your white cardstock and check it out! cool huh? *note: the more layers of alcohol ink you apply to the tag, the more "marbling" you get in the tag - i like it though, very distressed
stap 12 plaats je tag over de witte cardstock en kijk! Hoe cool (note des te meer lagen alcohol inkt je hebt gebruikt, des te meer marble effect je zult krijgen.)

step 13: apply a small amount of glossy accents to the inked side of the tag.
stap 13 breng een dunne laag glossy accent aan op de beinkte zijde van de tag

step 14: place over white tag to adhere.
stap 14 plak de clear tag op de witte tag.

step 15: cut two pieces of grungepaper 3"x4".
stap 15 snijdt 2 stukjes grungepaper van 3 x 4 inch (ongeveer 7,5 x 10 cm)

step 16: paint one side of both pieces with paint dabber (lettuce). *note: for those that need to have the "backs" of things finished, you might want to paint both sides of the grunge - i did not...
stap 16 schilder een zijde met een paint dabber (lettuce)

step 17: stack both pieces on to this die.
stap 17 plaats beide stukje op de stans. (Note eerst het gehele crunchpaper dus schilderen en dan pas uitsnijden. Dit werkt veel makkelijker voor detail stanzen)

step 18: yep! the branch on the regal crest die is perfect for this.
stap 18 Ja, de tak van de regal crest stans is hier perfect voor.

step 19: die cut the branches and keep them in the grunge.
stap 19 stans de takken maar laat ze nog even in het crunchpapier zitten.

step 20: place on a piece of chipboard and sand with sanding grip.
stap 20 plaats het geheel opm een stukje chipboard en schuur rustig de randjes.

step 21: remove grunge pieces and cut each one in half.
stap 21 verwijder het omliggende crunchpapier en knip de tak in 2en.

step 22: ink the edges with distress ink (pumice stone) using ink blending tool.
stap 22 inkt de randjes met distress inkt Pumice Stone met behiulp van een inkt blending tool.

step 23: using your fingers, curl the ends of each leaf.
stap 23 gebruik je vingers om de blaadjes om te krullen.

step 24: place two opposite branches on the tag as shown.
stap 24 plaats 2 tegengestelde takkaen op de tag zoals op de foto.

step 25: secure the top end with a tiny attacher. *note: i don't feel the need to glue the entire branch to the tag, but if you wanted it more secure you could.
stap 25 maak de top vast met behulp van een mini niet machine. (note ik heb niet de behoefte om het geheel vast te lijmen, maar het mag natuurlijk wel)

step 26: place the second layer of branches over the top, but slightly off-set them as shown.
stap 27 plaats de 2de rij takken er boven op, maar verschuif ze iets t.o.v. de onderste laag.

setp 27: secure with tiny attacher as well.
stap 27 niet ook deze vast.

step 28: tie a bow from ribbon.
stap 28 maak een strikje van lint.

step 29: adhere the bow to the top of the wreath. (loving my glue gun for things like this)
stap 29 plak het strikje vast met een lijmpistool.

step 30: snip some flat back pearls and embellish the wreath - we're done in record time!
stap 30 plak wat plakpareltjes op de krans.

Dat was het weer voor vandaag.
Heb je nu geen alcohol inkt in huis, bedenk dan dat je ook kan stempelen met een gewone stempel en witte acrijl verf. Gebruik dan een witte dabber om je stempel in te inkten. Maak wel je stempel direct na het stempelen schoon!

Ik hoop dat jullie ook nu weer veel inspiratie hebben op gedaan om lekker aan de slag te gaan.

Veel plezier en tot morgen.

Ellen namens het team van Doeading

2 opmerkingen:

  1. Super weer Ellen,
    Ja helaas heb ik er de tijd oak nog niet voor gevonden, ben wel alles aan het verzamelen dus ze gaan er wel komen. zeker een aantal van deze moois tags
    Bedankt voor de vertaling
    Groetjes Lia

    BeantwoordenVerwijderen
  2. Ziet er weer prachtig uit Ellen.
    Echt Schitterend.


    Gr Leny Hempen

    BeantwoordenVerwijderen

Disclaimer

Alle creatieve handelingen die u uitvoert naar aanleiding van informatie op onze website zijn geheel voor eigen risico. Doeading is niet aansprakelijk voor eventuele schades die voortvloeien uit door uzelf uitgevoerde handelingen die op ons blog worden beschreven.